BULLETIN NUMBER: SWB-040

DATE ISSUED: December 3, 2004

DATE CLOSED: December 3, 2004

AFFECTED SYSTEMS: Power Hawk 920

RELEASE LEVEL: PowerMAX OS 6.1 and 6.2.

EXPLANATION: The “cpu Y" and “Fail” LED indicators on PH920 systems stay on (red) after the console processor is 
booted. These LEDs are left in this state after a CPU reset and aren’t being properly cleared.
 
RESOLUTION: This problem has been corrected in the Console Processor code for PowerMAX OS 6.1SR2 and 
PowerMAX OS 6.2SR1. Until these service releases become generally available TEMP PATCHs are available by 
contacting support@ccur.com and requesting SAR3303_61.tar or SAR3303_62.tar and referencing this Software 
Bulletin.